Direct
POWER IN allows you to attack the power sectiondirectly.
Use the Direct button on front plate and/or the remote control handset.
It is not affected by the volume control.
You can connect, for example, an A/V processor (the volume control of the processor will then beactive);
a mixing desk or any other source that delivers 2V RMS and has a volume control.
The PRE OUT output allows you to use the output of the preamplifier.
The volume of the signal depends on the position of the potentiometer on the front plate.
The gain of the preamp is graduated in decibels - 0dB corresponds to a unitary gain. This output is
permanently available and does not depend on the remote control handset.
Monitor
This is a output/input loop for all types of recording systems.
The signal on the monitor output is that of the input selected and does not pass by the
preamp. The output of the recorder is connected to the input MONITOR IN.
This input is independent of the other inputs and is validated by the MONITOR on the front plate or by the remote handset.
kim 寫:請問哪兒可以找到kora 90的說明書? 後面有兩組輸出輸入端子不知道功能為何?
就是direct in/out跟monitor in/out這兩組
