新天新地音樂論壇

zaurux 寫: Thank you. When I understood that I had to replace "KERNEL" with the right number, I was able to install the extension and IPV6.

I don't have access to the USBridge via the network but I think it's not a power problem but a module problem. I don't think the ASIX (usb ethernet onboard) module is integrated in EVL kernel modules package.

italjet 寫:請問為何要輸入"5" ?
輸入了 "5" "dop" DSD 無聲出..........

Output device supports native DSD 
<delay>:<format>
delay = optional delay switching between PCM and DoP in ms.
format = dop (default if not specified), u8, u16le, u16be, u32le or u32be.

zaurux 寫:Too pitty, the USBridge is really optimized even if the ethernet uses a USB type chip.
On the RPI4, even with a reclocked usb and the USB3 ports cut off (uhubctl), I'm sure I won't fully benefit from your kernel.
I was thinking of upgrading to a CM4 module but I would still have the ASIX chips.
There was a project (Japanese ?), I think, of a case built on a CM4 compute module but I can't find it.

samshu 寫:

italjet 寫:請問為何要輸入"5" ?
輸入了 "5" "dop" DSD 無聲出..........

https://reurl.cc/DdkvMj

這篇中間這段有教。

代碼: 選擇全部

Output device supports native DSD 
<delay>:<format>
delay = optional delay switching between PCM and DoP in ms.
format = dop (default if not specified), u8, u16le, u16be, u32le or u32be.

所以可以試試 5:dop, 0:dop, 0:u32be 等不同的組合

samshu 寫:

smallguy60 寫: Hi Sam,
謝謝你的回答。 fyi 我的中文不太好，但是我可以解釋一下我現在的情況。

今天我也試打install.sh, 可是這次的error不同：

代碼: 選擇全部

bash: Error on line 296: arch-chroot /mnt wget -qP /root https://raw.githubusercontent.com/sam0402/ArchQ/main/pkg/squeezelite-1.9.8.1317-dsd-x86_64.pkg.tar.zst

好像從install.sh安裝squeezelite的時候有些問題。我看我安裝的output，後來發現這個部分遇到了error：

抱歉！這是小弟的失誤。
重新上傳squeezelite時，檔案名稱給錯了，請重新安裝就可。

code:checking keyring...
downloading required keys...
:: Import PGP key E85B8683EB48BC95, "Daniel Bermond <dbermond@archlinux.org>"? [Y/n] 
checking package integrity...
:: Import PGP key 80247D99EABD3A4D1E3A1836E85B8683EB48BC95? [Y/n] error: libmfx: key "80247D99EABD3A4D1E3A1836E85B8683EB48BC95" is unknown

:: File /var/cache/pacman/pkg/libmfx-22.1.0-1-x86_64.pkg.tar.zst is corrupted (invalid or corrupted package (PGP signature)).
Do you want to delete it? [Y/n] 
:: File /var/cache/pacman/pkg/vmaf-2.3.0-1-x86_64.pkg.tar.zst is corrupted (invalid or corrupted package (PGP signature)).
Do you want to delete it? [Y/n] error: failed to commit transaction (invalid or corrupted package)

Errors occurred, no packages were upgraded.
bash: Error on line 297: arch-chroot /mnt pacman -U --noconfirm /root/squeezelite-1.9.8.1317-dsd-x86_64.pkg.tar.zst

smallguy60 寫:

samshu 寫:

smallguy60 寫: Hi Sam,
謝謝你的回答。 fyi 我的中文不太好，但是我可以解釋一下我現在的情況。

今天我也試打install.sh, 可是這次的error不同：

代碼: 選擇全部

bash: Error on line 296: arch-chroot /mnt wget -qP /root https://raw.githubusercontent.com/sam0402/ArchQ/main/pkg/squeezelite-1.9.8.1317-dsd-x86_64.pkg.tar.zst

好像從install.sh安裝squeezelite的時候有些問題。我看我安裝的output，後來發現這個部分遇到了error：

抱歉！這是小弟的失誤。
重新上傳squeezelite時，檔案名稱給錯了，請重新安裝就可。

Hi Sam, 谢谢你帮我的忙。我可以确定那个问题解决。

我现在还有另外一个关于squeezelite的error。 上次你跟我提及我要等synchoronize的时候才可以安装ArchQ.
我已经等了好几天，还没成功安装ArchQ因为这个install libmfx error：

安装squeezelite的时候，我一定要装libmfx但是我不明白这个error的意思。 有没有其他可以安装squeezelite的办法？因为这个script在line 297总是fail, 我不能用install.sh安装ArchQ.

如果你有任何建议，非常感谢你。